Wednesday, November 03, 2010

Setting up a mandolin

A while back I bought a cheap mandolin because I wanted to get back into it. When I was young I used to play mandolin with my dad who played banjo. I played violin in orchestra and the mandolin is strung the same as a violin. I bet you knew that! We used to play music together in the cabin on Flathead Lake. No TV or anything like that up there. We used to sit by the fireplace and play music together and eat popcorn. It's something I look back on with great fondness. The crackle of the fire, the ring of the banjo and mandolin, and the taste and smell of the popcorn. The warmth of our family.

I was sitting around thinking,.. I know how to play a mandolin, I should get one! (sometimes you can be too cheap for your own good)


Anyway the action on my new mandolin was a bit on the high side. Since this mando didn't cost me that much I decided to lower the action on it myself instead of taking it in and paying money for someone else to do it. So I marked the position of the bridge with tape before removing the strings as you can see in the photo. I wanted to make sure i'd have a reference point to put the bridge back on as I didn't want to have to slide it around as that could scratch the finish. The octave is half way between the nut and the bridge so you can move the bridge back and forth until the octave is in the right place, but it helps to mark it first. Plus I tuned my guitar to my piano so that I knew what pitch E would be.


The bridge is in two pieces. top and bottom. I could see that if I removed material from the bottom of the top part I could lower the action. I did that by sanding down the bottom of the top part of the bridge. I realize that's kind of confusing. I left the low G string on (loose) so I could center the bridge when I re-strung it starting with the high E string. (usually when I change strings I'll do it one at a time, and not all at once, but since I had to remove the bridge I took them all off except the low G) I didn't bring the strings up to pitch until I had them all back on and I slowly brought them all back up like you would tighten the lug nuts on a car wheel when changing the tire. The results were really nice. It made the mandolin much easier to play as it doesn't require as much effort to push the strings down now. A lot more fun to play!


***

UPDATE


I was surfing and found out I should remove material from the foot of the bridge and then raise the turn wheels to get the strings to the right height. So I've done that and you can see what I've done HERE
here.

2 comments:

Jules said...

It's awesome that you did that all yourself. I totally LOVE the picture you paint of your family playing music together at the lake.. I can feel the warmth, this many years later.. and all the way from over here!

don said...

There's a lot of warmth left over in that old place.